owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN

Document: pdf (21.01 MB) 388 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 3 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Emergency starting 2.Turn off all lamps, heater and other elec-5.Open the cover of the jumper cable termi-6.Connect one end of one jumper cable trical loads. nal in the main fuse block. to the jumper cable terminal (A) of your 3.Set the parking brake firmly on each vehi- vehicle, and the other end to the posi- cle. Set the gear of another vehicle in “P” tive (+) terminal of the booster battery (PARK) position (with A/T) or in “N” (B). (Neutral) position (with M/T) and stop the Connect one end of the other jumper cable engine. to the negative (-) terminal of the WARNING booster battery, and the other end to zWhen connecting the jumper cable, stop the designated ground location of your the engine in another vehicle. Otherwise, vehicle. the cables or your clothes may be caught by the fan or drive belt and personal injury could result. zThe cooling fan turns on and off depend-NOTE 9 ing on the coolant temperature. Do notzYou cannot rescue other vehicle’s discharged bring your hands close to the fan while thebattery by connecting jumper cables using engine is running or Plug-in Hybrid EVthis jumper cable terminal. System is operating. 4.Open the bonnet, remove the fuse cover of the main fuse block. Refer to “Bonnet” on page 11-3 and “Fuses: Engine compartment” on page 11-16. For emergencies 9-3

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Outlander PHEV
year of production from: 2012

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.