or
		
	
	
		owners manual Seat Alhambra
		owners manual Seat Alhambra - year of production: 2010 - Seat Alhambra II 2 owners manual EN
	Document: 
pdf (5.73 MB) 305 pages
all ratings: 0 
average rating: 5  
		 
              
          
                                        text version of content this owner's manual page  
from owners manual to the vehicle Seat Alhambra, year of production 2010:
                                                
                                Advice
                                     On some vehicles, there is a starting assis-Jump lead terminal connections
           ● Never switch the positive and negative
                                     tance terminal in the engine compartment,
           poles or connect the jump leads incorrectly.
                                                               1. Switch off the ignition of both vehicles
                                     under a labelled cover.
           ● Note the instruction manual provided by            ››› .
           the manufacturer of the jump leads.
                                                               2. Connect one end of the red jump lead to
                                                                 the po+
                                                                    sitive  terminal of the vehicle
                                      How to jump start: description
             CAUTION                                                        A
                                                                 with the flat battery  ››› Fig. 192.
           To avoid considerable damage to the vehicle
                                                               3.onnect the other end of the red jump
                                                                 C
           electrical system, note the following careful-
                                                                 lead to the positive terminal  +  in the ve-
           ly:
                                                                 hicle providing assistance  B .
           ● If the jump leads are incorrectly connected,
                                                               4. For vehicles without Start-Stop system:
           this could result in a short circuit.
                                                                 connect one end of the black jump lead to
           ● The vehicles must not touch each other,
                                                                 the negative terminal  –  of the vehicle
           otherwise electricity could flow as soon as
                                                                 providing the current  B  ››› Fig. 192.
           the positive terminals are connected.
                                                               – For vehicles with Start-Stop system: con-
                                                                nect one end of the black jump lead  X  to a
                                                                suitable ground terminal, to a solid piece of
           Positive pole on the startingFig. 192  Diagram of connections for vehicles
                                                                metal in the engine block, or to the engine
                                      without Start-Stop system.
           assistance points
                                                                block itself ››› Fig. 193.
                                                               5. Connect the other end of the black jump
                                                                 lead  X  to a solid metal component bolted
                                                                 to the engine block or to the engine block
                                                                 itself of the vehicle with the flat battery.
                                                                 Do not connect it to a point near the bat-
                                                                 tery  A .
                                                               6. Position the leads in such a way that they
                                                                 cannot come into contact with any moving
                                                                 parts in the engine compartment.
                                      Fig. 193  Diagram of connections for vehicles
           Fig. 191  In the engine compartment: positive
                                      with Start-Stop system.
           pole for starting assistance  +
       254
                                                
                                         
                                
 Download PDF
Click here to download a pdf file with an instruction manual for Seat Alhambra
year of production from: 2010
 
                
Do you prefer pdf format?
Find out how to download
                 
                
        
                        Enter the code to download PDF file:
                        
                        
                        
                        
                        
        
                        
                        All pages in one PDF file!
How to get the code?
                        It's very simple! Just pay through a secure PayPal payment.
                        It will take no longer than a few minutes.
                        You will receive the code immediately after payment.
                        The code will be displayed on the screen and will be sent to you by e-mail address.
                        
                
:
 
                 
        Seat Alhambra II 2 owners manual 
pages 253 - 259
        Seat Alhambra II 2 owners manual 
page 256 / 305
		
		
                
                
		
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
                
			
 Download PDF