or
		
	
	
		owners manual Alfa Romeo 33
		owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN
	Document: 
pdf (12.9 MB) 378 pages
all ratings: 0 
average rating: 5 text version of content this owner's manual page  
from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:
                                                
                                FRONT SUSPENSION
               REMOVAL                                6.  Hold strut properly, then loosen
                                                                                                        A.2.0251 7
                                                      and unscrew the four screws
               1. Place car on lift, block rear
                                                                                     0
                                                      securing strut bracket to hub sup-
               wheels, jack up front of vehicle, then
                                                      port.
               support it by stands placed in adja-
               cent position to jacking points (refer
               to: Group 00- Lifting Points and 
               Towing).
               2. Remove four screws and wheel.
               3.  Unscrew nut securing ball pin of
               steering track rod@ to lever @ of 
               strut 0.
               4. UsingA.3.0156      puller with-
               draw upwards pin of steering track
               rod @ to lever@ of strut  0.             
                                                                                             1 Securing nut    2 Tool nut
                                                                                             3. Withdraw following parts (refer
                                                                                             to figure of page 21-61: washer0,        
                                                                                             upper  -washer  01 rubber sup-
                                                                                             port 0, complementary retain-
                                                                                             er @, lower washer0, with
                                                                                             boot @, spring rubberseat @                             
                                                                                             with  relevant  retainer  5 and
                                                                                                                      0
                                                                                             cap  0, rubber bound bumper0 ,                      
                                                                                             spring  @ with relevant lower
                                                       1 Screw                               cap   @ secured to compression
                                                                                             tool.
                                                                                             If required, gradually release spring
                                                                                             from tool, then separate spring from
                1  Strut         3 Ball joint                                                lower cap.
                                 4 Steering track rod                                        Then remove lever retainer 13
                2 Strut lever                                                                                              0
                                                                                             from spring lower cap.
                                                                                             4. Referring to the following fig-
                5. Operating withing engine com-
                                                      DISASSEMBLY                            ure, dismantle cap retainer0 to                                                    
                partment, loosen and remove four
                                                                                             following parts, taking care in
                nuts  @ securing strut to body0.                                             numbering them and mark direction
                                                      Clamp strut in vice and carry out
                                                      disassembly as follows:                to be kept during assembly: roller
                                                                                             thrust bearing@ , bearing wash- 
                                                       1.  Hook springby’tool A.2.0251 
                                                                                             er  @ and lower seal ring@ .                                                          
                                                      and screw two nuts@ of tool so as 
                                                      to progressively compress spring until
                                                      -upper cap is released.                Mark lowercapas   SO as to identify
                                                                                             them during assembly.
                                                      WARNING:
                                                      Compress spring as minimum as
                                                      possible so as to allow upper cap
                                                      rotation with relevant gasket and
                                                      retainer.
                                                      When compressing spring, ensure that
                                                      tool is always hooked firmly to
                                                      spring and lower cap.
                                                      2.  Unscrew shock absorber securing                      3 Bearing washer
                                                                                             1 Lower retainer
                                                      nut @ as shown on following
                                                      figure.                                2 Thrust bearing  4 Seal ring
                1 Body           2 Nut
                                                                   21-7                                               May 1983
                                                
                                        
 Download PDF
Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983
                
Do you prefer pdf format?
Find out how to download
                
        
                        Enter the code to download PDF file:
                        
                        
                        
                        
                        
        
                        
                        All pages in one PDF file!
How to get the code?
                        It's very simple! Just pay through a secure PayPal payment.
                        It will take no longer than a few minutes.
                        You will receive the code immediately after payment.
                        The code will be displayed on the screen and will be sent to you by e-mail address.
                        
                
:
 
 
                Alfa Romeo 33 owners manual 
pages 191 - 197
        Alfa Romeo 33 owners manual 
page 194 / 378
		
		
                
                
		
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
                
			
 Download PDF
Others owner's manuals for this model: