owners manual Tesla S

all ratings: 0 average rating: 5

Wiper Blades and Washer Jets 3.Hold the wiper arm (the wiper arm does Checking and Replacing Wiper not lock into a lifted position) and press Blades the locking tab while sliding the blade Caution: Wiper blades do not lock into adown the arm. lifted position. When cleaning or4.Align the new blade on the wiper arm and replacing a wiper blade, lift the wiper armslide it toward the hooked end of the arm only a short distance from the windshield,until it locks into place. just far enough to access the blade. Do5.Place the wiper arm against the not lift a wiper arm beyond its intendedwindshield. position. Doing so can cause damage that is not covered by the warranty. To make wiper blades easy to access, turn off the wipers, shift Model S into Park, then use the touchscreen to move them to the service position. Touch Controls > Settings > Service & Reset > Service Mode > ON. Note: Wipers automatically return to their normal position when you shift Model S out of Park. Periodically check and clean the edge of the wiper blade and check the rubber for cracks, splits and roughness. If damaged, replace the blade immediately to prevent damage to theIf the problem persists with new blades, clean glass. the windshield and wiper blades by wiping Contaminants on the windshield, or on thewith a soft cloth or sponge moistened with wiper blades, can reduce the effectiveness ofwarm water and non-detergent soap. Then, the wiper blades. Contaminants include ice,rinse the windshield and wiper blades with wax spray from car washes, washer fluid withclean water. The windshield is clean when bug and/or water repellent, bird droppings,water beads do not form. tree sap, and other organic substances.Caution: Only use cleaning products Follow these guidelines for cleaning:approved for use on automotive glass and rubber. Inappropriate products can • Clean the windshield using non-abrasivecause damage or smears, and create glass cleaner. glare on the windshield. • Lift the wiper arm a short distance awayCaution: Only install replacement blades from the windshield, just far enough tothat are identical to the original blades. access the wiper blade, then wipe theUsing inappropriate blades can damage blade clean using isopropyl (rubbing)the wiper system and affect the operation alcohol or washer fluid. of the rain sensor. If the wipers remain ineffective after cleaning, replace the wiper blades. Cleaning Washer Jets For optimum performance, replace wiperThe position of the windshield washers is set blades at least once a year. at the factory and should never need To replace wiper blades: adjusting. 1.Turn off the wipers, shift Model S intoIf a windshield washer becomes blocked, use a Park, then use the touchscreen to movethin strand of wire to clear any blockages the wipers to the service position. Touchfrom the nozzle. Controls > Settings > Service & Reset > Service Mode > ON. Note: Wipers must be OFF to turn on Service Mode. 2.Lift the wiper arm a short distance away from the windshield, just far enough to access the wiper blade. Maintenance 121

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders