owners manual Ford Mustang

all ratings: 0 average rating: 5

Maintenance Only use oils certified for gasoline engines WARNINGS by the American Petroleum Institute (API). To reduce the risk of personal injury, An oil with this trademark symbol make sure the engine is cool before conforms to the current engine and unscrewing the coolant pressure emission system protection standards and relief cap. The cooling system is under fuel economy requirements of the pressure. Steam and hot liquid can come International Lubricants Specification out forcefully when you loosen the cap Advisory Council (ILSAC), comprised of slightly. U.S. and Japanese automobile Do not add coolant further than the manufacturers. MAX mark. 1. Check the engine oil level. 2. If the engine oil level is not within the Checking the Engine Coolant normal range, add engine oil that meets Ford specifications. See When the engine is cold, check the Capacities and Specifications (page concentration and level of the engine 267). coolant at the intervals listed in the 3. Remove the engine oil filler cap and scheduled maintenance information. See use a funnel to pour the engine oil into Scheduled Maintenance (page 414). the opening. Note:Make sure that the coolant level is 4. Recheck the engine oil level. Make sure between the MIN and MAX marks on the the oil level is not above the normal coolant reservoir. operating range on the engine oil level Note: Coolant expands when it is hot. The dipstick. level may extend beyond the MAX mark. 5. Install the engine oil level dipstick and Note: If the level is at the MIN mark, below ensure it is fully seated. the MIN mark, or empty, add coolant 6. Fully install the engine oil filler cap by immediately. turning the filler cap clockwise until Maintain coolant concentration within three clicks are heard or until the cap 48% to 50%, which equates to a freeze is fully seated. point between -30°F (-34°C) and -34°F ENGINE COOLANT CHECK (-37°C). Note: For best results, coolant WARNINGS concentration should be tested with a Do not add engine coolant when the refractometer such as Robinair Coolant and engine is hot. Steam and scalding Battery Refractometer 75240. We do not liquids released from a hot cooling recommend the use of hydrometers or system can burn you badly. Also, spilling coolant test strips for measuring coolant coolant on hot engine parts can burn you. concentrations. Do not put engine coolant in the Note:Automotive fluids are not windshield washer fluid container. If interchangeable. Do not use engine coolant, sprayed on the windshield, engine antifreeze or windshield washer fluid outside coolant could make it difficult to see of its specified function and vehicle location. through the windshield. 215 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders