owners manual Ford Edge

all ratings: 0 average rating: 5

Driving Aids If the system detects a degraded Switching the System Off and On performance condition, a message warning You can temporarily switch the Blind Spot of a blocked sensor will appear in the Information System off in the information information display. Also the BLIS alert display. See General Information (page indicators will remain ON and BLIS will no 98). When the Blind Spot Information longer provide any vehicle warnings. You System switches off, you will not receive can clear the information display warning alerts and the information display shows but the alert indicators will remain a system off message. The telltale in the illuminated. cluster also illuminates. When you switch A "blocked" condition can be cleared in the Blind Spot Information System on or two ways: off, the alert indicators flash twice. • After the blockage in front of the Note:The Blind Spot Information System sensors is removed or the remembers the last selected on or off rainfall/snowfall rate decreases or setting. stops, drive for a few minutes in traffic You can also have the Blind Spot to allow the sensors to detect passing Information System switched off vehicles. permanently at an authorized dealer. Once • By cycling the ignition from ON to OFF switched off permanently, the system can and then back ON. only be switched back on at an authorized Note:If your vehicle has a tow bar with a dealer. factory equipped trailer tow module and it is towing a trailer, the sensors will CROSS TRAFFIC ALERT automatically turn the Blind Spot Information System off. If your vehicle has WARNING a tow bar but no factory equipped trailer tow module, it is recommended to turn the To help avoid personal injury, NEVER Blind Spot Information System off use the Cross Traffic Alert system as manually. Operating the Blind Spot a replacement for using the interior Information System with a trailer attached and exterior mirrors and looking over your will cause poor system performance. shoulder before backing out of a parking System Errors space. Cross Traffic Alert is not a replacement for careful driving. If the system senses a problem with the left or right sensor, the telltale will Cross Traffic Alert is designed to warn you illuminate and a message will appear in of vehicles approaching from the sides the information display. See Information when the transmission is in reverse (R). Messages (page 108). Using the System Cross Traffic Alert turns on when you start the engine and you shift into reverse (R). Once shifted out of reverse (R), Cross Traffic Alert turns off. Note:Cross Traffic Alert only functions while your transmission is in reverse (R). 211 Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders