Forde Edge II owners manual page 204

text version of content this owner's manual page from owners manual to the vehicle Ford Edge, year of production 2014:

Cruise Control You can override the set speed and gap by Automatic Cancellation pressing the accelerator pedal. The system does not operate below When you override the system, 12 mph (20 km/h). An audible warning the green indicator light sounds and the automatic braking releases E144529 illuminates and the lead vehicle if the vehicle drops below this speed. graphic does not show in the information display. Hilly Condition Usage The system resumes operation when you You should select a lower gear position release the accelerator pedal. The vehicle when the system is active in situations speed decreases to the set speed, or a such as prolonged downhill driving on lower speed if following a slower vehicle. steep grades, for example in mountainous Changing the Set Speed areas. The system needs additional engine braking in these situations to reduce the • Press and release SET+ or SET-. When load on the vehicle’s regular brake system you select km/h as the display to prevent them from overheating. measurement in the information Note:An audible warning sounds and the display the set speed changes in system shuts down if it applies brakes for approximately 2 km/h increments. an extended period of time. This allows the When you select mph as the display brakes to cool down. The system functions measurement in the information normally again when the brakes have cooled display the set speed changes in down. approximately 1 mph increments. Switching Adaptive Cruise Control • Press the accelerator or brake pedal Off until you reach the desired speed. Press and release SET+. Press and release the OFF button when • Press and hold SET+ or SET- until the the system is in stand by mode or switch desired set speed shows on the the ignition off. information display. The vehicle speed Note:The set speed memory erases when will gradually change to the selected you switch off the system. speed. Detection Issues The system may apply the brakes to slow the vehicle to the new set speed. The set WARNING speed displays continuously in the On rare occasions, detection issues information display while the system is can occur due to the road active. infrastructures, for example bridges, Resuming the Set Speed tunnels and safety barriers. In these cases, Press and release RES. The vehicle returns the system may brake late or to the previously set speed and gap setting. unexpectedly. At all times, you are The set speed displays continuously in the responsible for controlling your vehicle, information display while the system is supervising the system and intervening, if active. required. Note:Only use resume if you are aware of the set speed and intend to return to it. 201 Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

owners manual Ford Edge

owners manual Ford Edge - year of production: 2014 - Forde Edge II owners manual EN