Mitsubishi Outlander PHEV III 3 owners manual page 213

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 50 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Adaptive Cruise Control System (ACC)* To increase the set speed NOTE CAUTION zWhen the switch is held pushed, a buzzerzThe ACC braking control and proximity There are two ways to increase the set speed.sounds every time the set speed changes.alarm functions will not work while the By using the “RES +” switch: accelerator pedal is depressed. The set speed increases by 1 km/h every timeCAUTION NOTE you push up the “RES +” switch while thezThe setting speed should be set up the suita-zThe set speed indication on the display turns ACC control is working. If you hold theble speed according to a situation.to “---” when the accelerator pedal is switch pushed up, the set speed increases in 5By using the accelerator pedal:depressed. This indication remains as long as km/h increments. the pedal is in a depressed position. 7 When the accelerator pedal is depressedzThe ACC control at the original set speed while driving with the ACC control working,resumes as soon as you release the accelera- you can accelerate the vehicle temporarilytor pedal. Under certain conditions, however, beyond the presently set speed. the braking control and alarming functions of At the point where the vehicle speed is raisedthe ACC may not work for a short while after to your desired speed, push down and releasereleasing the accelerator pedal. the “SET -” switch; the new speed is then setzSet speed adjustment is impossible while the in the system. accelerator pedal is in a depressed position. To decrease the set speed NOTE There are two ways to decrease the set speed. zThere is some time lag between the setting to By using the “SET -” switch: a new speed and actually accelerating to that The set speed decreases by 1 km/h every time speed. you push down the “SET -” switch while the zSpeed setting operation is possible even in ACC control is working. If you hold the presence of a vehicle in front. In this case, switch pushed down, the set speed decreases however, the set speed alone increases with- in increments of 5 km/h. out actual acceleration taking place. 7-50 Starting and driving

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN