owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN

Document: pdf (21.01 MB) 388 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 49 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Adaptive Cruise Control System (ACC)* NOTE The set speed is indicated on the informationNOTE 7 zEven if the ACC is in the activated statescreen of the multi-information display.zThe ACC cannot start the control when any when the operation mode is set to “OFF”, the of the following conditions is present. You system does not automatically become acti-The ACC can be selected between approxi-are alerted to this state by a sounding buzzer. vated when the operation mode is set tomately 40 km/h to 180 km/h.•When the vehicle speed is lower than “ON” next time. You can set and initiate the speed controlapproximately 10 km/h or 180 km/h or when driving at approximately 10-40 km/hhigher. while a vehicle in front is being detected. In•When the vehicle is running at a speed To activate ACC control this case, the target speed is set to 40 km/h.between approximately 10 and 40 km/h and Setting to any speed outside this range doesthe ACC is not detecting any vehicle in With the ACC turned on (in the ‘standbynot cause the ACC to start the control.front. state’), push down the “SET -” switch whileWhen the ACC is initialized, a buzzer sound•When the ASC is in the OFF state. driving. is heard and the “SET” indicator lights up on•When ABS, ASC or TCL is working. When your desired speed is reached, releasethe screen. At the same time, the display•When the selector lever is in a position the “SET -” switch; then this speed is set andshowing the following distance setting andother than “D” (DRIVE). the ACC initiates the speed control to the setthe running-ahead vehicle symbol (only when• While the brake pedal is being depressed. speed. the ACC is detecting a vehicle in front) is•When the parking brake is engaged. switched to the in-control mode display.•When the system determines that its perfor- mance has been degraded due to contami- nants adhered to the sensor. •When there is any abnormality in the sys- tem. Starting and driving7-49

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Outlander PHEV
year of production from: 2012

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.