owners manual Skoda Fabia

all ratings: 0 average rating: 5

If you wish to determine the average fuel consumption over a certain period ofOil temperature time, you must set the memory at the start of the new measurement to zero us-If the oil temperature is lower than Ěĕ °C or if a fault in the system for checking ing the button B » Fig. ě on page ĖĘ. After erasing the memory, no value appearsthe oil temperature is present, only - -.- is displayed instead of the oil tempera- Ð in the display until you have driven approx. Ęĕĕ m. ture. 0he display is updated regularly while you are driving. Range 3arning against excessive speeds 0he estimated range in kilometres is shown on the display. It indicates the dis- First read and observe the introductory information and safety warn- tance you can still drive with your vehicle based on the level of fuel in the tank ings on page Ėė. and the same style of driving. ä 0he display is shown in steps of Ėĕ km. Once the fuel gauge pointer reaches the Adjust the speed limit while the vehicle is stationary reserve marking, the range is displayed in Ě km. › 3ith button A » Fig. ě on page ĖĘ, choose the menu point 3arning against ex- cessive speeds. 0he fuel consumption over the last Ěĕ km is used to calculate the range. 0he › Press the button B to activate the ability to set the speed limit (value flashes). range will increase if you drive in a more economical manner. › 1se the button A to set the required speed limit, e.g. Ěĕ km/h. If the memory is set to zero (after disconnecting the battery), the fuel consump- › Confirm the speed limit that was set with button B , or wait approx. Ě seconds tion of Ėĕ ltr./Ėĕĕ km is calculated for the range; afterwards the value is adapted until the setting is saved automatically (the value stops flashing). accordingly to the style of driving. 0his allows you to set the speed in Ě km/h intervals. Distance travelled Adjusting the speed limit while the vehicle is moving 0he distance travelled since the memory was last erased is shown in the dis- › 3ith button A » Fig. ě on page ĖĘ, choose the menu point 3arning against ex- play » page Ėė. If you want to measure the distance travelled from a particular cessive speeds. moment in time on, at this moment, reset the memory by setting the button › Drive at the desired speed, e.g. Ěĕ km/h. B » Fig. ě on page ĖĘ to zero. › Press button B to accept the current speed as the speed limit (the value flash- 0he maximum distance indicated in both memories is Ė ĞĞĞ km or Ğ ĞĞĞ km on es). vehicles with an information display. 0he indicator is set back to zero if this period If you wish to change the set speed limit, it is changed in Ě km/h intervals (e.g. the is exceeded. accepted speed of ęĜ km/h increases to Ěĕ km/h or decreases to ęĚ km/h). Average speed B › Confirm the speed limit that was set by pressing button again, or wait ap- 0he average speed since the memory was last erased is shown in the display prox. Ě seconds until the setting is saved automatically (the value stops flash- in km/hour » page Ėė. 0o determine the average speed over a certain period of ing). time, set the memory to zero at the start of the measurement using button Change or delete speed limit B » Fig. ě on page ĖĘ. › 3ith button A » Fig. ě on page ĖĘ, choose the menu point 3arning against ex- After erasing the memory, no value appears in the display until you have driven cessive speeds. approx. Ęĕĕ m. › Pressing the button B deletes the speed limit. › Pressing the button B activates the ability to change the speed limit. 0he display is updated regularly while you are driving. If the set speed limit is exceeded, an audible signal will sound as a warning. At Current speed the same time the message 3arning against excessive speeds appears on the 0he current speed which is identical to the display of the speedometer Ę » Fig. ė display with the set limit value. on page ĝ is indicated on the display. Ð 0he set speed limit value remains stored even after switching off the ignition. Ėę 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders