owners manual Mercedes S

all ratings: 0 average rating: 5

Service products and filling capacities 427 accordance with clean the antifreeze from components before MBSpecificationsforServiceProducts310.1. starting the engine. iWhenthevehicleisfirstdelivered, it is !Onlyaddcoolantthathasbeenpremixed filled with a coolant mixture that ensures with the desired antifreeze protection. You adequate antifreeze and corrosion could otherwise damage the engine. protection. Further information on coolants can be iThecoolantischeckedwithevery foundintheMercedes-BenzSpecifications maintenance interval at a qualified for Service Products, MB Specifications for specialist workshop. Service Products 310.1, e.g. on the Internet at Filling capacities http://bevo.mercedes-benz.com. Or contact a qualified specialist workshop. Missing values were not available at time of ! going to print. Always use a suitable coolant mixture, evenincountrieswherehightemperatures Model Capacity prevail. Otherwise,theenginecoolingsystemisnotAMGvehicles 12.6 US qt (11.5 l) sufficiently protected from corrosion and All other models 12.8 US qt (12.1 l) overheating. iHavethecoolantregularly replaced at a iUseMB325.0orMB326.0corrosion qualified specialist workshop and the inhibitor/antifreeze. replacementconfirmedintheMaintenance Booklet. data The coolant is a mixture of water andWasherfluid l antifreeze/corrosion inhibitor. It performs ca Important safety notes the following tasks: hni R corrosion protection GWARNING R antifreeze protection Windshield washer concentrate is highly Tec R flammable. If it comes into contact with hot raising the boiling point engine components or the exhaust system it If the coolant has antifreeze protection down could ignite. There is a risk of fire and injury. to -35 ‡ (-37 †), the boiling point of the Makesurethatnowindshield washer coolant during operation is approximately concentrate is spilled next to the filler neck. 266‡(130†). The antifreeze/corrosion inhibitor !Onlyusewasherfluidthatissuitable for concentration in the engine cooling system plastic lamp lenses, e.g. MB SummerFit or should: MBWinterFit. Unsuitable washer fluid R beatleast50%.Thiswillprotecttheengine could damage the plastic lenses of the cooling system against freezing down to headlamps. approximately -35 ‡ (-37 †). !Donotadddistilledorde-ionizedwaterto R not exceed 55% (antifreeze protection the washer fluid container. Otherwise, the downto-49‡[-45†]).Otherwise,heat level sensor may be damaged. will not be dissipated as effectively. !OnlyMBSummerFitandMBWinterFit Mercedes-Benz recommends an antifreeze/ washerfluidshouldbemixedtogether.The corrosion inhibitor concentrate in Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders