owners manual Nissan Titan

all ratings: 0 average rating: 5

Weight distribution hitch General set-up instructions are as follows: Thistypeofhitchisalsocalleda“load-leveling”or1. Park unloaded vehicle on a level surface. “equalizing”hitch. A set of bars attach to the ballWith the ignition on and the doors closed, mount and to the trailer to distribute the tongueallowthevehicletostandforseveralminutes weight (hitch weight) of your trailer. Many ve-so that it can level. hicles can’t carry the full tongue weight of a given2. Measure the height of a reference point on trailer, and need some of the tongue weightthe front and rear bumpers at the center of transferred through the frame and pushing downthe vehicle. onthefrontwheels.Thisgivesstabilitytothetow vehicle. 3. Attach the trailer to the vehicle and adjust A weight-distributing hitch system (Class IV) isthe hitch equalizers so that the front bumper recommended if you plan to tow trailers with aheight is within0-.5inches(0–13mm)of maximum weight over 5,000 lbs (2,268 kg) .thereferenceheightmeasuredinstep2.The LTI0131 Check with the trailer and towing equipmentrear bumper should be no higher than the Bumpertowing manufacturers to determine if they recommendreference height measured in step 2. The genuine NISSAN step bumper has provi-the use of a weight-distributing hitch system.WARNING sions to install a trailer hitch ball and is designedNOTE: Properly adjust the weight distributing to tow trailers of a maximum weight of 5,000 lb hitch so the rear of the bumper is no (2,268 kg). Aweight-distributing hitch system may af-higher than the measured reference Toinstallatrailerhitchballcutoutthecircleinthefect the operation of trailer surge brakes. Ifheight when the trailer is attached. If the center of the step bumper A , then remove it toyou are considering use of a weight-rear bumper is higher than the measured  distributing hitch system with a surgereferenceheightwhenloaded,thevehicle install the trailer hitch ball. brake-equipped trailer, check with themay handle unpredictably which could Weight carrying hitches surge brake, hitch or trailer manufacturercause a loss of vehicle control and cause Aweight carrying or “dead weight”ball mount isto determine if and how this can be done.seriouspersonalinjuryorproperty onethatisdesignedtocarrythewholeamountofFollowtheinstructions provided by the manufac-damage. tongue weight and gross weight directly on theturerforinstallingand using the weight- ball mount and on the receiver. distributing hitch system. Technical and consumer information 9-31

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders