or
		
	
	
		owners manual Suzuki SX4 S-Cross
		owners manual Suzuki SX4 S-Cross - year of production: 2013 - Suzuki SX4 S Cross owners manual EN
	Document: 
pdf (16.28 MB) 454 pages
all ratings: 0 
average rating: 5  
		 
              
          
                                        text version of content this owner's manual page  
from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:
                                                
                                EMERGENCY SERVICE 
        3)  Turn  on  the  hazard  warning  flasher if                                       7)  Continue to  raise  the  jack slowly and 
           your vehicle is  near traffic.                                                       smoothly  until the  tire clears  the 
        4)  Block the  front and  rear  of the  wheel                                           ground.  Do  not raise  the vehicle more 
           diagonally 
                     opposite  of the wheel  being                                              than  necessary. 
           lifted. 
        5)  Place  the  spare  wheel  near the  wheel                                                     A WARNING 
           being  lifted  as  shown  in  the  illustration                                    •  Use the jack only to change  wheels 
           in  case that the jack slips.                                                        on  level,  hard  ground. 
                                                                                              •  Never  jack up  the  vehicle  on  an 
                                                                                                inclined  surface. 
                                                                                              •  Never  raise  the  vehicle  with  the 
                                                                                                jack in  a  location  other  than  the 
                                                                                                specified  jacking point  (shown  in 
                                                                                     63J100     the  illustration)  near the  wheel  to 
                                                                                                be changed. 
                                                                                              •  Make  sure that the jack is  raised  at 
                                                                                                least 25  mm  (1  inch)  before  it con-
                                                                                                tacts  the  flange.  Use  of the  jack 
                                                                                                when  it is  within 25 mm  (1  inch)  of 
                                                                                                being  fully  collapsed  may result  in 
                                                                                                failure  of the jack. 
                                           54G253                                             •  Never get under the vehicle when it 
                                                                                                is  supported  by the jack. 
                                                                                              •  Never  run  the  engine  when  the 
                                                                                                vehicle  is  supported  by  the  jack 
                                                                                                and   never  allow  passengers   to 
                                                                                                remain  in  the vehicle. 
                                                                                     63J101 
                                                   6)  Position  the jack at an  angle as  shown 
                                                      in  the  illustration  and  raise  the jack by 
                                                      turning  the  jack handle  clockwise until 
                                                      the  jack-head  groove  fits  around  the 
                                                      jacking bar beneath  the vehicle body. 
                                                                                                                                 8-2
                                                
                                         
                                
 Download PDF
Click here to download a pdf file with an instruction manual for Suzuki SX4 S-Cross
year of production from: 2013
 
                
Do you prefer pdf format?
Find out how to download
                 
                
        
                        Enter the code to download PDF file:
                        
                        
                        
                        
                        
        
                        
                        All pages in one PDF file!
How to get the code?
                        It's very simple! Just pay through a secure PayPal payment.
                        It will take no longer than a few minutes.
                        You will receive the code immediately after payment.
                        The code will be displayed on the screen and will be sent to you by e-mail address.
                        
                
:
 
                 
        Suzuki SX4 S Cross owners manual 
pages 370 - 376
        Suzuki SX4 S Cross owners manual 
page 373 / 454
		
		
                
                
		
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
                
			
 Download PDF
 
	Others owner's manuals for this model: