Suzuki Grand Vitara II 2 owners manual page 27

text version of content this owner's manual page from owners manual to the vehicle Suzuki Grand Vitara, year of production 2005 - 2014:

Door Locks: 3, 5, 8 BEFORE DRIVING To program a new remote controller Programming/erasing the remote con- 7. Proceed to step 5) within 60 seconds troller code yourself 1) Close all the doors of the vehicle. after the engine has started. Your new vehicle was originally equipped 2) Sit in the driver’s seat and confirm that with two remote controllers. the driver’s door is unlocked. NOTE: If you have lost one of the remote control-3) Insert the key into the ignition switch.You cannot program the remote controller 4) Complete steps 1 through 6 describedif you don’t complete steps 1 through 6 lers, you should change the remote con- below within 25 seconds after step 3). within 25 seconds. troller code in your vehicle’s memory as You cannot program the remote controller soon as possible for security. If you pur- if you do not proceed to step 5) within 60 chase additional remote controllers, the seconds after the engine has started. new remote controllers need to be pro- grammed into your vehicle’s memory. You 5) Turn the ignition switch to the “LOCK” can perform this yourself by using the fol- position. lowing procedure: A buzzer will sound twice and the door NOTE: UNLOCK LOCK lock switch will be activated from the • You can program up to four remote con- (2) (1) lock position to the unlock position troller codes into your vehicle’s memory. automatically. The four codes may be the same or dif- 6) Press the “LOCK”, “UNLOCK” or ferent. “PANIC” button on the remote control- • If you try to program a fifth code, the four ler. remote controller codes that are pro- A buzzer will sound twice and the door grammed will be cleared automatically. 79K005 lock switch will be activated from the • If you program a new remote controller 1. Push the power door locking switch lock position to the unlock position automatically. of the driver’s door to the lock posi- code, all of the old remote controller If you want to program an additional codes that are in your vehicle’s memory tion and then push it to the unlock remote controller, repeat the procedure will be erased automatically. When you position. of step 6) using the additional remote 2. Repeat step 1 two more times. program a new remote controller, you controller. should reprogram any additional remote 3. Push the power door locking switch controllers at the same time. of the driver’s door to the lock posi- • To purchase new remote controllers, see tion. NOTE: Complete step 6) within 30 seconds. your SUZUKI dealer. 4. Remove the key from the ignition • Before you begin programming, have all switch and then insert it again. You can program up to four remote control- of your remote controllers available. 5. Repeat step 4 three more times. lers. 6. To start the engine, turn the ignition switch to the “START” position. Wait for 3 seconds. 2-10 79K21-03E

owners manual Suzuki Grand Vitara

owners manual Suzuki Grand Vitara - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Suzuki Grand Vitara II 2 owners manual EN