owners manual Seat Alhambra

all ratings: 0 average rating: 5

Advice If the wheel bolt is very tight, you may beent rims are fitted, the correct wheel bolts ● The bolts and threads should be clean, free able to loosen it by pushing down on the endwith the right length and correctly shaped of oil and grease and easy to thread. of the wheel brace carefully with your foot.bolt heads must be used. This ensures that ● To loosen and tighten the wheel bolts, al- Hold on to the vehicle for support and takewheels are fitted securely and that the brake ways use the wheel brace supplied with the care not to slip. system functions correctly. vehicle. In some circumstances, wheel bolts from the● Loosen the wheel bolts only about one turn Loosening wheel bolts same model vehicle should not be used.before raising the vehicle with the jack. ●Fit the wheel brace as far as it will go over ● Never grease or lubricate wheel bolts or the the wheel bolt ››› Fig. 185. Wheel bolt tightening torquewheel hub threads. Although they have been tightened to the prescribed torque, they ●Hold the wheel brace at the end and rotate The prescribed tightening torque for wheel could come loose while driving. the bolt approximately one turn anticlockwise bolts for steel and alloy wheels is 140 Nm. ● Never loosen the bolted joints of wheel ››› . Have the tightening torque of the wheel bolts rims with bolted ring trims. checked as soon as possible with a reliable Loosening anti-theft wheel bolts ● If the wheel bolts are not tightened to the torque wrench. correct torque, they may come loose while For wheels with full trim, the anti-theft wheel If wheel bolts are rusty and it is difficult to driving, and the bolts and rims may come lock must be threaded into position tighten them, the threads should be replaced out. If the tightening torque is too high, the ››› Fig. 186 2 or 3 . Otherwise it will not be and cleaned before checking the tightening wheel bolts and threads can be damaged. possible to mount the entire hubcap. torque. ●Take the adapter for anti-theft wheel boltsNever grease or lubricate wheel bolts or the out of the vehicle tool kit.wheel hub threads. Although they have been tightened to the prescribed torque, they ●Insert the adapter onto the anti-theft wheel could come loose while driving. bolt. ●Fit the wheel brace onto the adapter as far WARNING as possible. If the wheel bolts are not fitted correctly they ●Hold the wheel brace at the end and rotate could be released while driving leading to the bolt approximately one turn anticlockwise loss of vehicle control and serious damage. › ›› . ● Only use wheel bolts which correspond to the wheel rims in question. Important information about wheel bolts ● Never use different wheel bolts. The wheel rims and bolts have been de- signed to be fitted to factory options. If differ- 248

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders