owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 22 Friday, April 9, 2010 2:24 PM 22 Instruments and warning lights memory to zero at this moment in time by pressing the button B page21, fig.19 Setting function to zero A – Select the memory you want. on the windshield wiper lever or the handwheel A D on the multifunction steering wheel* page21, fig.19 for longer than 1 second. – Press the button B or D for more than 1 second. A A The maximum time indicated in both memories is 19 hours and 59 minutes and on The following readouts of the selected memory will be set to zero with the button A B vehicles which are fitted with information display*, it is 99 hours and 59 minutes. The on the windshield wiper lever or with the button A D on the multifunction steering indicator is set back to null if this period is exceeded. wheel:  average fuel consumption, Current consumption  distance driven, The current fuel consumption level is shown in the display in litres/100 km. This infor-  average speed, mation can help you to adapt your style of driving to the fuel co nsumption you wish to  Driving time. achieve. You can only operate the multi-functional indicator when the ignition is switched on. The display appears in litres/hour if the vehicle is stationary or driving at a low speed. After the ignition is switched on, the function displayed is the one which you last The indicated value will be updated every 0.5 seconds while you are driving. selected before switching off the ignition. Outside temperature Average fuel consumption The average fuel consumption since the memory was last erased is shown in the The outside temperature appears in the display when the ignition is switched on. display in litres/100 km  page 20. This information can help you to adapt your style If the outside temperature drops below +4 °C, a snow flake symbol (warning signal for of driving to the fuel consumption you wish to achieve. ice on the road) appears before the temperature indicator and a warning signal If you wish to determine the average fuel consumption over a certain period of time A sounds. After pressing the rocker switch A  page21, fig.19 on the windshield wiper B you must set the memory to zero at the start of the measurement using the button A lever or the button C on the multifunction steering wheel*  page 21, fig. 19, the A page21, fig.19 on the windshield wiper lever or with the handwheel A D on the function shown last is indicated. multifunction steering wheel* page21, fig. 19. A zero appears in the display for the first 100 m you drive after erasing the memory. WARNING The indicated value will be updated every 5 seconds while you are driving. Do not only rely upon the information given on the outside temperature display that there is no ice on the road. Please note that black ice may also be present Note on the road surface even at temperatures around +4°C - warning, drive with The amount of fuel consumed will not be indicated. care! Driving time The driving time which has elapsed since the memory was last erased, appears in the display. If you wish to measure the driving time as of a particular time, you must set the

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders