or
owners manual Suzuki SX4
owners manual Suzuki SX4 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Suzuki SX4 owners manual EN
Document:
pdf (4.86 MB) 279 pages
all ratings: 0
average rating: 5 text version of content this owner's manual page
from owners manual to the vehicle Suzuki SX4, year of production 2006 - 2014:
Windows: 3, 8
BEFORE DRIVING
To change the old remote controller
3. Push the power door locking switchof step 6) using the additional remote
controller. codes in your vehicle’s memory
of the driver’s door to the lock posi-
tion. If you have lost one of the remote control-
NOTE: lers, you should change the remote con-
4. Remove the key from the ignition
switch and then insert it again.Complete step 6) within 30 seconds.troller codes in your vehicle’s memory as
5. Repeat step 4 three more times.You can program up to four remote control-soon as possible for security.
6. To start the engine, turn the ignition lers.To erase the remote controller code(s) in
switch to the “START” position. your vehicle’s memory, you should pro-
Wait for 3 seconds.7) To complete programming, remove thegram the new remote controller code. The
7. Proceed to step 5) within 60 secondskey from the ignition switch or turn the old codes in your vehicle’s memory will be
after the engine has started.ignition switch to the “ON” position.erased automatically. If you have more
8) Make sure that the keyless start systemremote controller(s), you must program all
NOTE: and keyless entry system operate prop-of the remote controller codes at the same
time. You cannot operate the keyless start
erly by operating each remote control-
You cannot program the remote controller
ler. system and keyless entry system using
if you don’t complete steps 1 through 6
within 25 seconds. If you cannot operate the keyless start sys-any remote controller that is not pro-
You cannot program the remote controller grammed at the same time.
tem and/or keyless entry system, repeatFor details on how to program, refer to the
if you do not proceed to step 5) within 60
seconds after the engine has started.this programming procedure again.programming procedure in this section.
If you still cannot operate the systems, seeWhen you complete programming, make
your SUZUKI dealer. sure that the keyless start system and key-
5) Turn the ignition switch to the “LOCK”
position. less entry system operate properly by
A buzzer will sound twice and the door operating each remote controller.
lock switch will be activated from the
lock position to the unlock position
automatically.
6) Press the “LOCK”, “UNLOCK” or
“PANIC” button on the remote control-
ler.
A buzzer will sound twice and the door
lock switch will be activated from the
lock position to the unlock position
automatically.
If you want to program an additional
remote controller, repeat the procedure
2-9
80J22-03E
Download PDF
Click here to download a pdf file with an instruction manual for Suzuki SX4
year of production from: 2006
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Suzuki SX4 owners manual
pages 19 - 25
Suzuki SX4 owners manual
page 22 / 279
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Other available language versions of this manual:
Suzuki SX4 manuel du proprietaire FR
show the owner's manual
pdf - 22.1 MB
