Alfa Romeo 33 owners manual page 213

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

FRONT AND REAR BRAKES pin @ connecting lever@to placed between support and body.REINSTALLATION adjusting fork@ , withdraw pin To reinstall control lever with with washers from fork and separate this one from the lever. support, reverse the order of removal and complying with the following: 2. Unscrew bolt@ securing the 1. Apply a coat of specified grease lever to its relevant support@ and (AGIP Fl Grease 15or SHEL L separate the two components. Retinax Gll) to surfaces where 3. Withdraw bush@ andhan - cables slide in the incovered section dle @ from lever, remove pin and to fork adjusting screw. stopper cotter@ on which ratchet 1 Lever 4 Lock nut 2. Carry out parking brakeadjusT- 2 Screws 5 Bracket gear paw1 @ rotates and withdraw ment (see: Group 00 Chassis and 3 Nut the pin from its seat. Body Maintenance). 4. Separate from lever the whole DISASSEMBLY block of ratchet gear control with pushbutton 0, spring@, stop- per 0, rod@ and pawl 0. With reference to the following 5. If necessary, remove switch of exploded view remove the control CONTROL CABLES lever operating as follows. the parking brake indicator from pin from cotter brake support. 1. Withdraw REMOVAL 1. Operating from the drivers compartment remove rear console and, by operating lock nut and nut of adjustment fork loosen control cables and withdraw them from equalizer. 2. Remove rear wheel and drum together with hub (see: Group 25- Rear Hub - Removal). 3. Operating on wheel side release control cable end@ from lever @ fair-lead @. and free it from Release control,cable from brake shoe holder0, withdraw it from this last and remove it after releasing 6.51 + 10.84) it from the underbody clamps. 1 Handle 9 Bush 2 Lever 10 Sector gear 3 Pushbutton 11 Light switch 4 Spring 12 Bolt 5 Stopper 13 support 6 Rod 14 Pin 7 Paw1 15 Adiustment fork 8 Pin CHECKS AND INSPECTIONS REASSEMBLY 1. Checcomponentsk visually For reassembly of the support and against excessive wear and other reverse the order of lever unit, damages. assembly and, in particular comply Check, in particular, surface con- with the following: ditions of the lever coupling bush to 1. Lubricate brake lever bush and support, and wear conditions of pawl ratchet gear components with speci- teeth and scroll gear. 1 Brake shoe 3 Control cable fied grease (AGIPFl Grease @or holder 4 Fair lead 2. Check against presence of elec-2 Lever SHELL RetinaxGll). tric cable discontinuity and that 2. Tighten to specified torque of parking brake indicator switch is 9 t 15N.m (0.9+ 1.5 kg.m), CHECKS AND INSPECTIONS properly functioning. (6.51 f 10.84ft.lb) bolt hinging lever Make sure that control cables are 3. Replace worn or faulty com- to brake support. sound; replace them if necessary. ponents. May 1983 22-18

owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN