or
owners manual Alfa Romeo 33
owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN
Document:
pdf (12.9 MB) 378 pages
all ratings: 0
average rating: 5 text version of content this owner's manual page
from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:
GEARBOX
Shafts and Gears Assembly)then fit thrust bearing on direct drive .
CHECKS AND INSPECTIONS
2. shaft (Refer to: Group 12).
Fit differential casing (Refer to:
1. Thoroughly clean casing with
Differential Casing -Assembly).7. Fit rear support (Refer to: Rear
solvent and check it for scores, nicks Support - Assembly).
or evidence of pitting. 3. Fit differential carriers (Refer
to: Differential Carriers- Assembly).
2. Check the casing’s mating sur-
4. Fit rods and forks. Thoroughly
faces making sure there are no nicks,
clean rear cover and oil sump mating
no evidence of roughness nor or old
sealants. surfaces; fit new gaskets with speci-
fied sealants and then fit cover
3. Check that the clutch for
and sump (Refer to: Rods and Forks
retaining pin is not in any way
damaged. - Assembly).
5. Fit clutch control fork retaining
ASSEMBLY pin.
6. Fit the clutch control fork and
1. Fit shafts and gears (Refer to:
GEARBOX OUTER LINKAGE
3. CHECKS
DISASSEMBLY Loosen and remove the nut@
AND INSPECTIONS
@ securing the
and the screw
1. Loosen and remove the nut with
gearbox lever support0 to the
washer @ as well as the screw
0 1. Thoroughlyclean outer linkage
flexible bush ocated on the rear
securing the main selector rod@ to @I metal parts with solvent and make
extensions; now remove side wash-
the gearbox lever0; then remove sure they are in good condition.
ers 3 as well as the spacer
and the two bush- 0.
the spacer@ 0 2. Check linkage articulated joints
ings 0. for excess wear.
3. Make sure boot is in perfect
condition; if damaged or worn,
replace it.
ASSEMB.LY
1. Fit rear support (Refer to:
5-Speed Manual Gearbox- Rear
Support).
2. Apply grease(AGIP Fl Grease
1 Support 5 Spacer 15 or SHELL Retinax G) to the
1 Gearbox lever5 Rear support 2 Nut 6 kasher spacer0 on the speed selector
2 Spacer 6 Main selector rod3Washer 7 Screw lever to main selector rod connec-
3 Bushing 7 Retaining screw 4 Flexible bush tion 4and to the spacer
4 Nut with washer 0 0
securing the fork to the flexible bush
4. on the gearbox cover.
Remove rear support (Refer to:
2. Loosen and remove the gearbox
Apply 5 g (0.176 oz) of same grease
5-Speed Manual Gearbox- Rear
lever guide@ retaining screws with
Support). to the speed selector lever guide0.
washers 0; now remove the guide,
3. Go on to fit all gearbox outer
6. Lastly remove the flexible bush
the bootaand the bushing
0
linkage following disassembly pro-
located at lever’s end. with the help of following tools: a
cedure in reverse sequence.
press, a plate, a base and punch tool.
1 Boot 3 Bushing 1 Spacer 3 Spacer
2 Screws with 4 Guide 2 Guide 4 Main selector rod
washers
13-25 May 1983
Download PDF
Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Alfa Romeo 33 owners manual
pages 168 - 174
Alfa Romeo 33 owners manual
page 171 / 378
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model:
