owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN

Document: pdf (12.9 MB) 378 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

GEARBOX 0: Tightening torque R.G. switch to gearbox casing 40+49 N-m (4 + 4.9 kg-m 28.92 + 35.43 ft-lb) TESTING Check working condition of spring- plunger-rod assembly making sure that speed selection is smooth and that speeds do not jump out of their position and become disengaged. 3 Nur 1 5th speed gear Check working condition of spring- 2 Hub plunger-rod assembly making sure / that speed selection is smooth and that speeds do not jump out of their position and become disengaged. SHAFTS AND GEARS 14. Fit oil sump, with a new gasket, DISASSEMBLY . on the gearbox casing and tighten relevant screws. Pinion shaf-t gears 15. Position rear caver, with a new 1. Remove rods and forks (refer to: both gearbox casing gasket, on 5. Remove differential casing (Re- Rods and Forks - Disassembly). centering seats; fit the oil bleeder fer to: Group 17 - Differential 2. Acting on relevant sleeves, en- valve with relevant retaining plate, Differential Casing). and then tighten all screws. gage two speeds in order to prevent pinion from turning. 6. Slowly push pinion shaft toward 16. Apply a coating of ISECO the differential casing and remove all 3. With a punch, eliminate all Molykote BR2 grease to the main parts making up the train on the selector rod ,seal ring as well as to caulking from the gear train to its work seat on the rod. pinion locking nut 0. pinion (I~L, 2nd, 3rd and 4th 4. With spanner A-5.0196, loosen speeds), being careful to mark the Using 1001 A.3.0294, fit the seal sequence and the position of gear ring on the rod. the nu-t and remove the hub 0, the bushings to be later followed during 5th speed gear 0 with relevant reassembly. synchroniting unit, and the bushing. 1 Main selector rod 17. Fit the relevant lever on the main selector rod and then, using a punch, fit the retaining pin. 18. Fit reverse gear switch on rear caver. 1 Pinion 3 Direct drive shaft 2 Primary shaft May 1983 13-10

Download PDF

Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.