owners manual Skoda Octavia

all ratings: 0 average rating: 5

Resetting Service Interval Display Auto-check control If the variable service interval is set in your vehicle and if the service interval dis- play is reset, the variable service interval is switched to the fixed service interval. First read and observe the introductory information and safety warn- Only the “Oil Change Service” indication is reset, the “Inspection” indication is notings on page ĝ. reset. Certain functions and conditions of individual vehicle systems are checked contin- 3e therefore recommend that the Service Interval Display be reset only by a uously when the ignition is switched on. ŠKODA Partner, who will reset the display with a vehicle system tester. Error messages and/or other information are displayed in the instrument cluster 0he ŠKODA Partner will carry out the following steps. display. ›He resets the display memory after the relevant inspection. Some messages are displayed simultaneously with the warning lights » page Ėė ›He makes an entry in the service schedule. or warning icons in the display » page Ėĝ. ›He affixes a sticker with the entry of the following service interval to the side of the dash panel on the driver's side. 3hile the operational faults remain unrectified, the messages are always indica- ted again. After they are displayed for the first time, the symbols  or  continue 0he reset can be done with the button ě » Fig. ė on page ĝ. to be indicated without any extra messages for the driver. ›Switch off the ignition (for vehicles with the KESS5 system, also close the driv- er's door). Symbol Description ›Press the button ě and keep it pressed down.  3arning ›Switch on the ignition. ›Release and then press again the button ě .  Danger CA10ION 3ARNING 3e recommend that you do not reset the service interval display yourself. Incor- If you have to stop for technical reasons, then park the vehicle at a safe dis- rectly setting the service interval display could cause problems to the vehicle. tance from the traffic, switch off the engine and activate the hazard warning light system » page ĚĘ. 0he warning triangle must be set up at the prescri- Note bed distance - observe the national legal provisions when doing so. ■ Information is retained in the Service Interval Display even after the vehicle bat- tery is disconnected. ■ If the instrument cluster is exchanged after a repair, the correct values must be 3arning lights entered in the counter for the Service Interval Display. 3e recommend having this work undertaken by a ŠKODA Partner. Introduction ■ For more information on the service intervals » service schedule, chapter serv-  ice intervals. 0his chapter contains information on the following subjects:  Clutches of the automatic gearbox too hot ĖĘ  Handbrake ĖĘ  Brake system Ėę  Front seat belt warning light Ėę   Power steering Ėę   0raction control system (0CS) Ėę Ėė 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders