owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2004, 2005, 2006, 2007, 2008, 2009 - Subaru Outback Legacy III 3 owners manual EN

Document: pdf (14.79 MB) 444 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2004 - 2009:

3-16 Instruments and controls To change the current setting, take the following steps. 1. Within 12 seconds after turning on the ignition switch, press the “/SET” switch for at least 2 seconds. 4. Select “ON” for activated initial move-5. Select “End” by pressing the “” or mentor“OFF”fordeactivatedinitial move-“” switch. And press the “/SET” switch ment by pressing the “” or “” switch.to finish the meter setting menu. And press the “ /SET” switch to decide the desired setting. NOTE If you do not need to change the previous 2. The display shows“METER . Your vehicle’s initial movement SETTING”, and then changes to thesetting, select “” and press the “/SET”setting of the meter/gauge needles setting screen. switch. has been set for activation “ON” at 3. When the setting screen is displayed, the time of shipment from the factory. select “Initial movement” by pressing the . If you turn the ignition switch to the “ ” or “” switch. And press the “ / “Acc” position, turn the ignition switch SET” switch to enter the setting process. to the “LOCK” position, or open and close the driver’s door during the setting procedure, the new setting will be canceled. . It is not possible to cancel sequen- tial illumination of the combination meter while sequential illumination is actually taking place. Cancel sequen-

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2004

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.