owners manual Subaru Outback

all ratings: 0 average rating: 5

2-14 Keysanddoors the knob and the next exceeds five7. Performparts 5and6oftheprocedurethe second time is identical to that entered seconds, an error will occur. In thisfor each of the remaining digits of thethe first time. event, perform the procedure againtransmitter code beginning with the sec-NOTE beginningwithpart4.Ifanerroroccursond digit (counting from the left) and six times, perform the procedure againfinishing with the eighth digit.If the code entered the second time is starting with part 3. not identical to the code entered the NOTE first time, an error will occur. In this . When you finish entering the eighthevent, perform the procedure again digit, an electronic tone will sound forbeginningwithpart5.Ifanerroroccurs 30 seconds. five times, perform the procedure again . If the interval between one push ofstarting with part 3. the knob and the next exceeds 5 10.If you wish to program another trans- seconds, an error will occur. In thismitter code into the system (up to four event, perform the procedure againtransmitter codes can be programmed into beginningwithpart4.Ifanerroroccursthe system), perform the procedure begin- six times, perform the procedure againning with part 4. When you have finished starting with part 3. programming all of the necessary trans- 8. Before the electronic tone stops mitter codes into the system, remove the sounding, use the power door lock knobkey from the ignition switch. 6. When you have finished entering theto again enter the transmitter code begin-11. Test every registered transmitter to number, pull the lock knob to the “UN-ning with the leftmost digit.confirm correct operation. LOCK” side within 5 seconds.NOTE ! Deleting old transmitter codes NOTE If you do not start entering the numberThe control unit of the keyless entry . An electronic tone will sound.using the lock knob before the electro-systemhasfourmemorylocationstostore . If you pull the lock knob to thenic tone stops sounding, an error willtransmitter codes, giving it the ability to “UNLOCK” side when more than 5occur. In this event, perform the proce-operate with up to four transmitters. When seconds have passed, an error willdure again beginning with part 3.you lose a transmitter, the lost transmit- occur. In this event, perform the proce-9. When you have finished entering theter’s code remains in the memory. For dure again beginning with part 4. If ancodeasecondtime,anelectronictonewillsecurity reasons, lost transmitter codes error occurs six times, perform thesound for 1 second to indicate completionshould be deleted from the memory. procedure again starting with part 3.of registration, provided the code enteredTo delete old transmitter codes, program

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders