owners manual VW EOS

all ratings: 1 average rating: 5

Menu Function See Assistants Turn the Adaptive Front Lighting System (AFS) on and off (if applicable). Current warning and information messages. Vehicle This menu item is only displayed when warning or infor- status mation messages are available. The number of available messages is shown in the display. Example: 1/1 or 2/2. Includes the Convenience and Lights & Vision submenus, Settings as well as many settings such as time, speed warning for winter tires, language, and units. MFI menu (Multi-Function Indicator) ¤ Please first read and note the introductory information and heed the WARNINGS The MFI display has 2 automatic memories: 1 – single trip memory and 2 – total trip memory. The number of the trip memory is shown at the upper right of the display. The trip memories are in addition to the trip odometer, which is displayed in the bottom part of the instrument cluster and controlled using the E‡3%4 button on the right of the instrument panel ⇒ fig. 11 (4). To display the distance driven on trips 1 and 2, select the Route item in the MFI menu. Press the OK button ⇒ fig. 15 to toggle between Route 1 and Route 2 (trip 1 and trip 2). Push and hold the OK button to manually reset a trip memory to zero. The memory accumulates and stores information about distance driven and fuel used from the time the ignition was switched on until the time it 1 Single trip memory was switched off. If the ignition stays off for 2 hours or more, stored information is auto- matically deleted. If the trip is continued within 2 hours after the ignition was switched off, the new values are added. The memory displays and stores the accumulated driving and fuel con- sumption data of any number of single trips up to a total driving time of 2 Total trip memory 99 hours and 59 minutes, and up to a total distance of 9,999 miles (9,999 km). If one of the maximum values is exceeded, then the memory is automatically cleared and starts again from 0. Possible MFI menu displays The following displays can be accessed in the MFI menu if enabled under Settings > MFI data. Displays that are not enabled will not appear. Display Function Travel time Driving time in hours (h) and minutes (min) corresponding to trip memo- ries 1 and 2 (toggle). Consumption Current fuel consumption in miles per gallon (l/100 km) while driving. --.- mpg When units are set to miles, dashes appear instead of a number when Consumption the engine is running and the vehicle is standing still. --.- l/100 km When units are set to kilometers, the display shows liters consumed per hour when the engine is running and the vehicle is standing still.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders